您现在的位置:首页>>中心>>安规测试及认证>>RCM认证>>正文
在线咨询

澳新征求在外部电源能效标签上增加VI等级的公众意见

澳新征求在外部电源能效标签上增加VI等级的公众意见

  • 本站
  • 2014-10-08
  • 新闻
  • 已浏览

2014年9月12日,澳大利亚Eenrgy Rating发起公众咨询,征求根据外部电源国际能源效率标识协议VI级标准在澳新能效标签上增加更高能效等级VI级标记的意见。本次征求公众意见的截止期为2014年9月26日。

目前澳新关于外部电源的能效法规《2012温室和能源最低标准(外部电源)决定》允许外部电源(EPS)产品以III、IV和V级的能效水平进行标记。

2013年9月,美国能源部(DOE)公布了3.0版的外部电源国际能源效率标识协议(International Efficiency Marking Protocol,IEMP),其中规定了以一个新的更高的能效水平“VI”级标记的EPS性能要求。鉴于此,根据EPS产品更高效率等级的能源效率要求,Energy Rating提议修订现行的澳新EPS能效规定,以反映这些国际变化。

Energy Rating征求利益相关方关于本次将目前EPS能效规定提高到VI级能效水平的意见,以确保这种改变反映了允许产品在符合IEMP规定的VI级性能要求的情况下标记VI等级的政策意图。

具体GEMS标签以及GEMS高效率水平规定的变化如下表所示:

目前EPS规定
提议的EPS新规定
7 GEMS labelling requirements
Labelling and communication requirements
1 For paragraphs 24 1 b, 26 1 a and 26 1 b of the Act, the specified labelling and communication requirements for products covered by this Determination are the requirements mentioned in clause 5.1 of AS/NZS 4665.2:2005 and Appendix A of AS/NZS 4665.1:2005 in relation to the energy performance mark to be shown on the product.
8 GEMS labelling requirements
Labelling and communication requirements
1 For paragraphs 24 1 b, 26 1 a and b of the Act, the specified labelling and communication requirements for a product class mentioned in subsection 6 2 are:
a the requirements mentioned in Appendix A of AS/NZS 4665.1:2005 and section 5 of AS/NZS 4665.2:2005 Energy Performance Mark in relation to the energy performance mark to be shown on the product or
b1 if a product exceeds the energy performance requirements for Mark V as mentioned in Appendix A of AS/NZS 4665.1:2005 then the product may:
i be labelled in accordance with the requirements of that standard for Mark V or
ii be labelled in accordance with the requirements of the IEMP for Mark VI.
8 Other GEMS requirements
High efficiency level
1 For subsection 24 2 and paragraph 27 1 a of the Act, the specified requirements for products covered by this Determination to meet the high efficiency level are the requirements mentioned in this section.
Note: This provisions that follow specify the requirements for products to be designated as “high efficiency IV” or “high efficiency V” for the purposes of GEMS.
High efficiency level IV requirements HE IV
2 The specified requirements for high efficiency level IV HE IV are as follows:
a for product classes 1 to 2—the requirements mentioned in subclause 3.1.1 of AS/NZS 4665.2:2005 No Load Power Consumption and Average Active Mode Efficiency and
b for product classes 3 to 4—the requirements mentioned in subclause 3.1.2 of AS/NZS 4665.2:2005 Average Active Mode Efficiency.
High efficiency level V requirements HE V
3 The specified requirements for high efficiency level V HE V are as follows:
a for product classes 1 to 2—the requirements mentioned in subclause 3.2.1 of AS/NZS 4665.2:2005 No Load Power Consumption and Average Active Mode Efficiency and
b for product classes 3 to 4—the requirements mentioned in subclause 3.2.2 of AS/NZS 4665.2:2005 Average Active Mode Efficiency.
4 For subsection 24 2 and paragraph 27 1 e of the Act, the requirements for conducting tests are the same as those mentioned in subsection 6 2 to 4 inclusive of this Determination.
9 Other GEMS requirements
High efficiency level
1 For subsection 24 2 and paragraph 27 1 a of the Act, the specified requirements for a product class mentioned in subsection 6 2 to meet the high efficiency level are:
a the requirements mentioned in section 3 of AS/NZS 4665.2:2005 High Efficiency Levels for that product class or
b the performance requirements for Mark VI mentioned in the IEMP. 2

|<< << < 1 2 > >> >>|

返回顶部
认证信息检索:
站内搜索.. 模糊搜索:

广朋咨询服务有限公司© 版权所有

客服热线: 020-8148 6695, 8165 9395 传真: 020-8165 9395; Skype: liyun_01 E-mail: mike@gptek.com.cn

在线咨询互动服务: 客服1 互动服务: 客服2 粤ICP备14072239号